GOE Freelander 2
fuel-tank plates
One of the vulnerable points of the FL2 is the positioning and orientation of the
plastic fuel tank. It protrudes significantly below the rear sub-chassis assemble,
at an angle of 90deg. Although LR provide some metal strapping, this is more for
support than for protection.
The GOE alloy plate protects the leading edge and main body area
of the tanks from impact, with a smooth 45deg sloping front,
whilst having minimal impact on ground clearance
Made from lightweight 6mm high-impact alloy
One of the vulnerable points of the FL2 is the positioning and orientation of the
plastic fuel tank. It protrudes significantly below the rear sub-chassis assemble,
at an angle of 90deg. Although LR provide some metal strapping, this is more for
support than for protection.
The GOE alloy plate protects the leading edge and main body area
of the tanks from impact, with a smooth 45deg sloping front,
whilst having minimal impact on ground clearance
Made from lightweight 6mm high-impact alloy
|
Other proposed FL2
products
- rock
sliders
- rock
sliders + side steps
GOE Freelander 2
lower frot bash plate
The GOE front plate is designed to provide maximum frontal protection without
compromising approach angles or ground clearance.
This is a one-piece 6mm high-strength alloy plate, laser cut and can be colour-coded to match your vehicle for a small additional charge.
Fitting is a 1+ hour process, and will require cutting of the existing plastic lower grill.
The GOE front plate is designed to provide maximum frontal protection without
compromising approach angles or ground clearance.
This is a one-piece 6mm high-strength alloy plate, laser cut and can be colour-coded to match your vehicle for a small additional charge.
Fitting is a 1+ hour process, and will require cutting of the existing plastic lower grill.
|
 |
 |
 |
 |
 |
 |
 |
FL2
Products: Protection plates
"Only Land Rover!"
